top of page
icons8-email-30_edited.png

info@swrap.in

youtube (3).png
asset 0.png

Our Products

Home /  All Products /  SAVIOUR® Oil Absorbents

SAVIOUR® Oil Absorbents

SAVIOUR® Oil Absorbents are made from polypropylene. Polypropylene is an inert synthetic fibers which has high absorption capacity. They are available in a wide range of formats and are light weight and nominally dust-free. They are typically available in white colour and with orange colour net in some formats.

Applications

SAVIOUR® Oil Absorbents are OIL ONLY sorbents. They are typically used on water to contain and adsorb hydrocarbons that are on the surface or in an emulsion in the water. They will float on water and at the same time repel water (as long as surfactants are not also present). They can also be used to control hydrocarbon spills on land.

Formats

SAVIOUR® Oil Absorbents are available in different formats like Long Booms, Mini Booms, Pads, Rolls, Pillows, Sweeps. Combination of these formats is available in Spill Kits of different absorption capacity. They are made from 40gsm Polypropylene Cloth and filling material.

Typical Liquids Adsorbed

SAVIOUR® Oil Absorbents are suitable for adsorbing hydrocarbons and non-polar organic solvents, eg., oil, paraffin, diesel, benzene, alcohols, toluene, trichloroethane, esters and ethers.

Limitations of Use

We recommend that a compatibility test with the liquid of interest be carried out prior to using the absorbent. Do not use on aqueous liquids or aggressive liquids, strong acids, caustic oxidizers or reactive chemicals. In particular there is a risk of degradation with a few corrosive chemicals.

Precautions

Appropriate personal protective equipment should be worn while handling any Oil Spill. SAVIOUR® Oil Absorbents are not in themselves hazardous products, however, they take on the characteristics of the liquids they adsorb. Adequate precautions should be taken when handling or storing hazardous / flammable materials as per the procedures and laws. Users should be informed of the risks incurred in use, storage and disposal of used sorbents.

Disposal

Dispose of used sorbents only in accordance with local and national regulations.

Waste Minimization

SAVIOUR® Oil Absorbents can be disposed of by incineration yielding less than 0.2% ash (ASTM D-482). The high energy value of the sorbents is also favourable for incineration and waste-to-fuel systems.

Absorption / Sorbency

SAVIOUR® Oil Absorbents capacity quoted in the table below is based on testing per ASTM F 726-12 “Standard Test Method for Sorbent Performance of Adsorbents.” Sorbency figures mentioned are nominal; there will be variability in sorbent performance. Capacity and speed of absorption is affected by the absorbed liquid’s polarity, surface tension and viscosity. Ambient temperature may also affect results. Therefore, these numbers may not be directly applicable to your specific use.

Storage

May be stored in Normal Dry Conditions away from direct Sunlight without altering absorption capacity or consistency.

Temperature Range

30 °C to +70 °C

​

mats image
Mats/ Pad

Are in sheets forms of different sizes. They are cut from Long Rolls and can be used in almost all spill application on land and water. They can be used on water to pick up oil covering large surface areas. Can be used on land and solid surfaces to wipe out the spilled oil.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    S400M 40/50
    40 x 50
    1.4
    100
    140
    S200S 40/50
    40 x 50
    0.7
    100
    70
Rolls
Rolls

Suitable for coverage of large surface areas of water, they can be easily cut to length and shapes.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    RM 40/300
    40 x 300
    86
    2
    172
    RM 80/300
    80 x 300
    172
    1
    172
pillow image
Pillows

Used for bulk absorption of oil on land or water. Can be used in the centre of the booms to absorb the collected oil.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    SP 30/50
    30 x 50
    4
    10
    40
    SP 20/40
    20 x 40
    2
    16
    32
socks image
Socks / Mini Boom

Generally used for on-land applications to contain and adsorb spills. They can also be used in water channels and culverts.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    SS312
    3'' dia x 120
    4
    10
    40
    SS324
    3'' dia x 240
    8
    6
    48
    SS330
    3'' dia x 300
    10
    6
    60
booms image
Long Booms

Used on Land/Water in rivers and harbours. Can be connected together to form barriers of long length with help of hook and ring provided in 8” boom and only ring in 5” boom. These are anchored at each end and positioned across still or moving water.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    LS20/300
    8'' dia x 300
    65
    2
    130
    LS13/300
    5'' dia x 300
    28
    3
    84
particulates image
Particulate

Loose particulates for use on water and land.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    P10
    10 kg
    125
kit image
Spill Management Kit

Contain different formats of absorbents in combination for different absorption capacity. Easy for storage and quick response. Kits of all sizes are available.

  • Product Code
    Size (Cm)
    Sorbency (Ltr) Per Nos.
    Nos. per Case
    Sorbency (Ltr) per Case
    AFS 40
    40
    AFS 70
    70
    AFS 140
    140
    SMP 250
    250
    SMT 250
    250

Special custom-made formats and kits are also available.

All specifications / parameters are subject to variation of +/- 5%.

bottom of page